Characteristics 性 能 | Test Item 测试项目 | Testing Method 测试方法 | Specification 规格 |
Electrical Characteristics 电器性能 | 1 | Conductor resistance 导体阻抗 | JIS-C-3102(at20℃) | Less than 2.20Ω/m 小于2.20Ω/m |
2 | Insulation resistance 绝缘电阻 | Apply the voltage of DC500Vfor min | More than 1000MΩ 小于1000MΩ |
3 | Rated Current 额定电流 | — | 1A |
4 | Dielectric Srtength 耐压强度 | AC500V，0.5 Ma,1分钟,相邻两导体在空气中 AC1000V，0.5 Ma,1分钟,相邻两导体染浸在水中 | PASS |
5 | Continuity Test 导通测试 | Apply TesterDC3V 用DC3V测试器 | No open/Short Citcuit 无开路及短路 |
6 | Rated voltageg&temperature 额定电压及温度 | UL Sub,758 | 60V 80℃ |
Physical&Cemical Characteristics 物理和化学性能 | 7 | Operating temperature 操作温度 | Fixed wiring condition | -30℃~80℃ |
8 | Flammability Test 难燃性测试 | UL Sub.758VW-1 | Pass合格 |
9 | Heat Resistance 抗热性能 | 85℃/96Hrs | No trouble with insulation Resistance and withstand voltage 绝缘电阻和耐电压符合要求 |
10 | Humidity Resistance 抗湿测试 | 40℃,95%RH,96Hrs | No trouble with insulation Resistance and withstand voltage 绝缘电阻和耐电压符合要求 |
11 | Temperature Cycling Test 温度循环测试 | -40℃–25℃–85℃–25℃ ORH 65RH 95RH 65RH 5cycle | No trouble with insulation Resistance and withstand voltage 绝缘电阻和耐电压符合要求 |
| | 12 | Flexing test 柔性测试 | 600g重物垂吊夹具，0.5R,180℃ 60cycle/min 往复运动 | 耐曲折测试≥100cycle |
13 | 10R,180mm,70cycle/min往复运动 | 耐曲挠测试≥100,000cycle |
14 | Abrasion Test 耐磨测试 | φ0.5mm,600g,60cycles/min | Min 100,000cycles100,000回以上 |
15 | Insulation Elongat- Ion and Tensile St- Rength Test 绝缘胶抗拉性测试 | Elongation 伸长率 | JIS-K-6732 | Min70% 70%以上 |
16 | TensileStrength 抗拉强度 | Min.3.5kg/mm2 |
17 | Adhesive Srtength 附着力 | Between Conductor and Insulator 导体与绝缘体之间 | Greater than0.2kg/cm 大于0.2 kg/cm |
18 | Between Insulator and Insulator 绝缘体与绝缘体之间 | Greater than0.6kg/cm 大于0.6kg/cm |
19 | Between Reinforcing Tape and Insulator 绝缘体与保强板之间 | Greater than0.2kg/cm 大于0.2 kg/cm |
20 | First Insertion and Withdrawal Pull Force Test 初期插拔力测试 | Use JST Wafer Fixed on 使用JST插座 | Max.2kg/cm 2kgf以下 |
21 | Insertion and Withdrawal Durability Test 插拔耐久性测试 | 30Cycles Insertion and Widhdrawal 30回插拔 | Tin Plated Flat Copper Wire Plat- Ing No Peeled Off,and Test Item No.2,3,18,20to be cleared.导体镀锡层不剥离,符合2,3,18,20实验规格 |