产品规格参数：
1. SCOPE适用范围 This specification covers the requirements for:“stereo jack” |
| 本规格书适用:“stereo jack”系列 |
| 2. Rating 额定值: DC 30V 0.5A |
| 3. CONSTRUCTION 构造 |
| 3.1 Shape and dimensions are subject to drawing. 形状 尺寸依图面确定． | |
| 3.2 All part not allowed to exist rust、crack and poor planting.各部分应无生锈、裂痕、电镀不良现象． | |
| 4. Standard test conditions shall be 5 to 35℃ in temperature and 45 TO 85% inhumidity. |
| 温度5～35℃,湿度45～85%标准状态下测试。 |
| 5. Operating temperature range -40 to +70℃.温度-40～+70℃ 环境内使用。 |
| Item项目 | Test condiction 测试条件 | | Performance 规格 | |
| 6. Electronical performance电气性能 | | | | | |
| 6.1 | Contact | Being measured at 1 KHz small current | 50mΩ max. | | |
| resistance | contact resistance meter. | | | |
| 接触阻抗 | 在1kHz小电流下测量。 | | 50毫欧以下。 | | |
| 6.2 | | Measurements shall be made following | | | |
| application of DC500V potential | | | |
| Insulation | across terminals and across terminals | 100MΩ min. | | |
| resistance | and frame for 1 minute. | | | |
| 绝缘阻抗 | 在端子之间和端子与壳之间加DC 500 V | 100兆欧以上。 | | |
| 条件下,持续1分钟测量。 | | | |
| 6.3 | | AC 500 V(50Hz or 60 Hz)shall be | | | |
| Withstand | applied across terminals and acoss | There shall be no breakdown. | |
| voltage | teminals and frame for one minute. | | | |
| 耐电压 | 在端子之间和端子与壳之间加AC 500 V | 无击穿现象出现. | | |
| (50Hz或60Hz)条件下,持续1分钟测量。 | | | |
| 7. Mechanical performance机械性能 | | | | | | |
| 7.1 | | Insert plug gauge into the specimen | | Insertion force: | | |
| | | | | |
| Insulation and | and extract for test. | | 插入力度: | 0.3kgf～3kgf | |
| extraction | And then measure the insertion and | | Extraction force: | | |
| force | extraction force. | | 拔出力度: | 0.3kgf～3kgf | |
| 插入力及拔出 | 用插头插入插座和插头拔出插座测量 |