1. Rating額定值: | AC 250V 10A |
2.Operation temperature range使用溫度範圍: | -20℃~+70℃ |
3.Preservative temperature range保存溫度範圍: | -25℃~+80℃ |
4. Construction dimension結構尺寸: | Apply to the appended drawing:符合附加圖紙 |
Item项目 | Test condition測試條件 |
5.Electrical characteristics電氣性能 |
5A | Contact Resistance 接觸阻抗 | Being measured at 1KHz small current contact resistance meter. 在1KHZ小電流下測量. |
5B | Insulation Resistance 絕緣阻抗 | Measurements shall be made following application of DC500V potential across terminals and across terminals and frame for 1 minute. 在端子之間和端子與殼之間加DC500V條件下,持續1分鐘測量. |
5C | Withstand Voltage 耐電壓 | AC1500V (50Hz or 60Hz) shall be applied across terminals and across terminals and frame for one minute. 在端子之間和端子與殼之間加AC1500V(50HZ或60HZ)條件下,持續1分鐘測量. |
6. Mechanical characteristics機械性能 |
6A | Insertion and Extraction force 插拔力 | Being measure at across spring piece and across matching plug for ergometer. 用測力計在插頭與彈片之間進行測量. |
6B | Terminal Strength 端子強度 | A static force of500gfbeing applied in one direction on the tip of terminal for 1minute. 将500克之靜負荷施加於端子頂部的一個方向持續1分钟。 |
7. Durability耐久性 |
7A | Soldering test 可焊性試驗 | The tip of the terminals shall be dipped 2mm in the solder bath at a temperature of 240±5℃for 3±0.5sec. 端子頂部被浸入焊錫池2mm深,溫度240±5℃,時間3±0.5秒。 |