IMPORTANT
Don’t plug in any appliance where the load exceeds 16Amp.Always ensure the plug of any appliance is fully inserted into the timer outlet.If cleaning of the timer is required,remove from mains power and wipe it with a dry cloth.
DON’T IMMERSE TIMER IN WATER OR ANY OTHER LIQUID.
Heaters and similar appliances should never be left unattended during operation.The manufacture r recommends such appliances not be connected to timers.
MANUAL ON/AUTO/MANUAL OFF SETTING
1.Press MODE button to revert the three mode in turn.
2.In MANUAL ON or MANUAL OFF mode the Timer doesn’t operate as settings in AUTO mode.
3.When the mode is turned from MANUAL to AUTO,the Timer will keep the setting of MANUAL until to the next timer setting.
INITIAL OPERATION
1.Plug the timer into a regular 220-240 Volt household power point and turn the power on.
2.Let it be charged for about 12 hours.
3.After charging clear all current infomation by pressing the RESET button with a sharp object such as a pen or pencil.
4.The timer is now ready to be set up for use.
SETTING CURRENT TIME
1.Press the CLOCK button and hold, also press the WEEK button to until the actual day is displayed.And then set the time by press the HOUR button and then MIN button as setting week,until the correct time is displayed.When setting,the buttons WEEK,HOUR or MIN can be held down for rapid forward counting.
2.Release both buttons.The week and time will be set.
3.To reset completing settings,repeat previous steps..
COUNTDOWN FUNCTION
1.Press both buttons CLOCK and MODE to enter into the countdown function.The LCD displays “countdown”,“start”,”00:00”.
2.Press HOUR and MIN to set the time as your expected.
3.Press the button CLOCK to start countdown.The appliance will stop working after the time your setting.
4.Press the button CLOCK again to stop.
WEEK PROGRAMS SETTING
1.The timer has a total of 20 ON/OFF programs a day,18 combinations of day or blocks of days are available for this Timer as follows:
Mo
Tu
We
Th
Fr
Sa
Su
Mo,Tu,We,Th,Fr,Sa,Su
Mo,Tu,We,Th,Fr
Sa,Su
Mo,Tu,We,Th,Fr,Sa
Mo,We,Fr
Tu,Th,Sa
Mo,Tu,We
Th,Fr,Sa
Mo,We,Fr,Su
Tu,We,Th
We,Th,Fr
1.Press the TIMER button and release,The first ON setting can be made now.
2.Press WEEK button to choose one combination in 18.Then press the HOUR and MIN button to adjust the correct time.
3.Press TIMER button again to finish ON setting and enter into the first OFF setting.By repeating 2 to make the first OFF setting.
4.Press the TIMER button again to finish the first OFF and enter into second ON setting.Repeat 2 and 3 program remaning settings.
5.Then press the CLOCK button and the TIMER is ready to operate. After completing settings,press the CLEAR button and hold for 5 seconds,it will save your program and be locked.
EXAMPLE:TIMER ON at 16:20 and TIMER OFF at 20:15 everyday
a.Press TIMER and LCD displays “1”, “on”
b.Press WEEK until LCD displays “MO,TU,WE,TH,FR,SA,SU”
c.Press HOUR until LCD displays 4:00PM or 16:00.
d.Press MIN till LCD displays 4:20PM or 16:20
e.Press TIMER again and LCD displays “1”, “off”
f.Repeat the above c and d steps to make LCD displays 8:15PM or 20:15
g.Press the button “CLOCK” to cancel your setting.
h.If you need to lock the program in case any wrong operating.Press the button “CLEAR” and hold 5 seconds,the timer will work as your setting from now on.
TIP:When verifying your programs ensure that the settings do not overlap,especially when using the block option.
RANDOM FUNCTION
1.Press both buttons WEEK and HOUR,the LCD will display RANDOM.
2.When this function is ON,the setting will executed with a random advance of 0-32 minutes.
3.Press both buttons WEEK and HOUR to cancel this function.
SUMMERTIME FUNCTION
1.Press both buttons HOUR and MIN,the LCD displays “summer”
2.The clock will set back one hour.
3.Press the two buttons again to revert to wintertime.
12/24 HOUR MODE
Press CLOCK and TIMER simultaneously to turn between 12 and 24 hour mode.
SPECIFICATIONS
Voltage 1100-120V AC 60Hz
Max Load 16A,1750W
Min Setting Time 1 Minute
Operating temperature -10 to +40℃
Accuracy +/-1 minutes per month
Battery backup NI-MH（Li） 3.6V>2000hours